Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of District of Columbia

Soft Washing for Wood Siding in District of Columbia

Soft wash for wood siding. Low-pressure cleaning with a mild solution that kills mold, mildew and algae on siding, roofs and other delicate surfaces without damaging them. Typical cost $300-$800.

When we handle soft washing for wood siding in District of Columbia, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. With wood siding, the right approach is soft wash.

How we clean it

Soft washCleaning method
Soft wash, typically under 500 PSI; up to about 1,000 PSI with a wide tip for bare wood prepPressure

Cleaning solution: A mild house-wash mix; an oxygen-based cleaner when the wood will be stained.

What to know about cleaning wood siding

Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides. A soft wash cleans it without raising the grain, and is the usual first step before repainting or restaining.

Avoid: High pressure that raises fibers, gouges the wood or strips sound paint unevenly.

How often: Every 1-2 years, and before every repaint.

Is it time for soft washing for wood siding?

  • Green, black or gray film on siding, especially on the north side
  • Black streaks running down the roof
  • Moss or lichen on shingles or tile
  • A musty smell around shaded walls
  • Pressure washing would damage the surface

What causes the dirt and stains

  • Algae, mold and mildew that grow in shade and humidity
  • Roof algae that feeds on the limestone filler in shingles
  • Pollen and dust that give growth something to hold on to
  • Sprinklers and gutters that keep walls damp

What you can do yourself

  • Trim back branches and shrubs that touch the house so walls can dry
  • Keep gutters clear so water doesn't overflow down the siding
  • Spot-clean small areas with a soft brush and mild detergent
  • Aim sprinklers away from the house

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Using too strong a mix, which can burn plants and fade surfaces
  • Using too weak a mix, which leaves growth alive and it returns quickly
  • Climbing ladders with a spray wand and chemicals
  • Mistaking soft washing for 'pressure washing on low'

What happens on the day

  1. Identify the surfaces and the type of growth
  2. Pre-wet plants, cover sensitive fixtures and close windows
  3. Apply a solution mixed for the surface and let it dwell
  4. Rinse at low pressure from the top down
  5. Rinse plants again and check every side with you

Typical soft washing for wood siding prices

$300-$800Typical range for a typical single-family home exterior
2-4 hoursTypical time on site
Every 1-2 years for siding, every 3-5 years for roofsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for wood siding

Soft Washing for Wood Siding in District of Columbia

Humid summers in District of Columbia grow green algae and black mildew on the shaded sides of homes, especially on vinyl and painted wood. A soft wash kills the growth rather than just knocking it off, so the siding stays clean longer.

We cover 52 cities and towns across District of Columbia. Find soft washing for wood siding in your city:

Soft Washing for Wood Siding: frequently asked questions

How much does soft washing for wood siding cost in District of Columbia?

Soft Washing for Wood Siding typically costs $300-$800 for a typical single-family home exterior, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for soft washing for wood siding?

For wood siding: soft wash, typically under 500 PSI; up to about 1,000 PSI with a wide tip for bare wood prep. What we avoid: high pressure that raises fibers, gouges the wood or strips sound paint unevenly. The cleaning solution does most of the work, followed by a gentle rinse.

Is soft washing for wood siding safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule soft washing for wood siding?

Every 1-2 years, and before every repaint. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in District of Columbia

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Pre-Paint Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $250-$600

Pool Deck Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $200-$500

House Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $300-$700

Pool Deck Cleaning

Pool deck cleaning that removes slippery algae, sunscreen residue and stains without damaging coatings or stone.

Typical $200-$500

Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$600

Driveway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$400

Pre-Paint Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$600

Deck Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $250-$600

Exterior Mold & Mildew Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $250-$700

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Concrete Sealing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $400-$1,200

Ready for a cleaner home or business?

Get a free pressure washing quote in District of Columbia. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote