Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of District of Columbia

Driveway Cleaning for Exposed Aggregate in District of Columbia

Moderate-pressure wash for exposed aggregate. Driveway pressure washing that removes dirt, mildew, tire marks and many oil and rust stains for an even, clean finish. Typical cost $150-$400.

Looking for driveway cleaning for exposed aggregate in District of Columbia? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. For exposed aggregate, that means moderate-pressure wash.

How we clean it

Moderate-pressure washCleaning method
Usually 1,500-2,500 PSI with a surface cleanerPressure

Cleaning solution: A concrete pre-treatment and degreaser as needed.

Cleaning exposed aggregate safely

Exposed aggregate concrete has stones showing at the surface. Too much pressure can loosen stones at the edges, and the surface looks best when cleaned and resealed.

Avoid: High pressure at edges and cracks, which can pop out aggregate.

How often: Clean yearly; reseal every 2-3 years.

When to book driveway cleaning for exposed aggregate

  • Dark, blotchy or striped concrete
  • Black mildew along edges and in shaded areas
  • Oil spots and tire marks
  • Rust stains from sprinklers or fertilizer
  • Weeds and moss in cracks and joints

What causes the dirt and stains

  • Vehicle drips and tire rubber
  • Dirt, pollen and leaves ground in by traffic
  • Mildew in shaded and damp spots
  • Iron in well water or fertilizer leaving rust marks

What you can do yourself

  • Blot fresh oil with cat litter and sweep it up after a day
  • Sweep regularly so leaves don't leave tannin stains
  • Fix leaking vehicles to stop new spots
  • Avoid deicers that contain ammonium nitrate or ammonium sulfate, which damage concrete

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Stripes and swirl marks from using a wand instead of a surface cleaner
  • Etched concrete from a narrow tip held too close
  • Oily wash water running into the street and storm drains
  • Spreading oil around instead of lifting it

How we handle driveway cleaning for exposed aggregate

  1. Sweep and inspect the driveway and note stains
  2. Degrease oil spots and pre-treat mildew
  3. Clean the whole surface with a rotary surface cleaner
  4. Detail edges, joints and expansion cracks
  5. Rinse, post-treat and walk the driveway with you

How much does driveway cleaning for exposed aggregate cost?

$150-$400Typical range for a typical two-car driveway
1-2 hoursTypical time on site
Once a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for exposed aggregate

Driveway Cleaning for Exposed Aggregate in District of Columbia

In District of Columbia, concrete has to deal with summer mildew and winter salt and freeze-thaw cycles. Annual cleaning and a sealer every few years help it last.

We cover 52 cities and towns across District of Columbia. Find driveway cleaning for exposed aggregate in your city:

Driveway Cleaning for Exposed Aggregate: frequently asked questions

How much does driveway cleaning for exposed aggregate cost in District of Columbia?

Driveway Cleaning for Exposed Aggregate typically costs $150-$400 for a typical two-car driveway, and usually takes 1-2 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for driveway cleaning for exposed aggregate?

For exposed aggregate: usually 1,500-2,500 PSI with a surface cleaner. What we avoid: high pressure at edges and cracks, which can pop out aggregate. We keep the pressure even and controlled, with the right tools for the surface.

Is driveway cleaning for exposed aggregate safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule driveway cleaning for exposed aggregate?

Clean yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in District of Columbia

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Soft Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $300-$800

Pre-Paint Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $250-$600

Pool Deck Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $200-$500

House Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $300-$700

Pool Deck Cleaning

Pool deck cleaning that removes slippery algae, sunscreen residue and stains without damaging coatings or stone.

Typical $200-$500

Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$600

Pre-Paint Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$600

Deck Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $250-$600

Exterior Mold & Mildew Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $250-$700

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Concrete Sealing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $400-$1,200

Ready for a cleaner home or business?

Get a free pressure washing quote in District of Columbia. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote