Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of District of Columbia

Patio Cleaning for Pavers in District of Columbia

Pressure wash with a surface cleaner for pavers. Patio cleaning for concrete, pavers and natural stone, with the pressure and cleaner matched to the material. Typical cost $150-$400.

Patio Cleaning for Pavers is one of the jobs we do most often in District of Columbia. Typical jobs cost $150-$400, and you approve the price before we begin. On pavers, the method we use is pressure wash with a surface cleaner.

Method and pressure

Pressure wash with a surface cleanerCleaning method
Usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possiblePressure

Cleaning solution: A paver cleaner or pre-treatment; efflorescence needs a dedicated cleaner.

What to know about cleaning pavers

Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them. Re-sanding the joints, often with polymeric sand, and sealing afterward keeps weeds and ants out and holds the pavers in place.

Avoid: A narrow tip aimed into the joints, which blows out sand and can loosen pavers.

How often: Clean every 1-2 years; reseal every 2-4 years.

Signs you need patio cleaning for pavers

  • Green or black growth between pavers or on shaded concrete
  • Grease spots near the grill
  • Stains from planters, leaves and furniture
  • Weeds in the joints
  • White chalky haze on pavers or stone

Where the grime comes from

  • Shade and damp soil around the patio
  • Cooking grease and food spills
  • Rust from metal furniture and planters
  • Efflorescence (salts) rising out of masonry

Easy upkeep between cleanings

  • Move planters now and then so they don't leave rings
  • Clean grill grease quickly with dish soap and hot water
  • Pull weeds from joints before they spread
  • Sweep often so leaves don't stain

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Blowing joint sand out of pavers
  • Etching or pitting soft stone like travertine and sandstone
  • Acid cleaners on limestone and travertine
  • Stripping an existing sealer unevenly

What happens on the day

  1. Check the patio material and any sealer
  2. Move furniture and protect nearby plants
  3. Pre-treat growth, grease and stains
  4. Clean with the right pressure and tools
  5. Rinse, re-sand joints if needed, and walk the patio with you

Typical patio cleaning for pavers prices

$150-$400Typical range for a typical backyard patio
1-2 hoursTypical time on site
Once a year, more often in shadeRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for pavers

Local patio cleaning for pavers for District of Columbia

In District of Columbia, concrete has to deal with summer mildew and winter salt and freeze-thaw cycles. Annual cleaning and a sealer every few years help it last.

We cover 52 cities and towns across District of Columbia. Find patio cleaning for pavers in your city:

Patio Cleaning for Pavers: frequently asked questions

How much does patio cleaning for pavers cost in District of Columbia?

Patio Cleaning for Pavers typically costs $150-$400 for a typical backyard patio, and usually takes 1-2 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for patio cleaning for pavers?

For pavers: usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possible. What we avoid: a narrow tip aimed into the joints, which blows out sand and can loosen pavers. We keep the pressure even and controlled, with the right tools for the surface.

Is patio cleaning for pavers safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule patio cleaning for pavers?

Clean every 1-2 years; reseal every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in District of Columbia

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Soft Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $300-$800

Pre-Paint Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $250-$600

Pool Deck Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $200-$500

House Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $300-$700

Pool Deck Cleaning

Pool deck cleaning that removes slippery algae, sunscreen residue and stains without damaging coatings or stone.

Typical $200-$500

Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$600

Driveway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$400

Pre-Paint Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$600

Deck Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $250-$600

Exterior Mold & Mildew Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $250-$700

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Ready for a cleaner home or business?

Get a free pressure washing quote in District of Columbia. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote